10-24-2024, 03:22 AM
1. Begin by visiting Google to download Waircut and Jumpstart.
Next, install Jumpstart on your computer, as Waircut requires it along with a minimum of .NET Framework version 4 to function.
Once installed, run Waircut in administrator mode and initiate a scan.
Select the Wi-Fi network you wish to access and click on "pixie-pixie-dust."
Allow the application some time to retrieve the PIN.
After obtaining the PIN, close Waircut and reopen Jumpstart in administrator mode.
Choose the second option and input the PIN you acquired.
Proceed by clicking "next" and disable the automatic attack feature located in the bottom right corner.
Select the Wi-Fi network you identified in Waircut and click "next."
Wait a few minutes, and your computer will connect automatically.
There are numerous methods to discover the password for the connected Wi-Fi, but here is a straightforward approach that does not require additional software.
To do this:
Open the Run dialog, type "ncpa.cpl," and press Enter.
Double-click on the Wi-Fi connection.
Select "Properties," then navigate to the Security tab and check the box for "Show password."
Congratulations! You now have access to your neighbor's Wi-Fi password.
You can also perform a MITM attack to compromise your neighbor's device.
Note: This method may require multiple attempts, but with some luck, you might obtain the PIN on your first try. Best of luck.
Next, install Jumpstart on your computer, as Waircut requires it along with a minimum of .NET Framework version 4 to function.
Once installed, run Waircut in administrator mode and initiate a scan.
Select the Wi-Fi network you wish to access and click on "pixie-pixie-dust."
Allow the application some time to retrieve the PIN.
After obtaining the PIN, close Waircut and reopen Jumpstart in administrator mode.
Choose the second option and input the PIN you acquired.
Proceed by clicking "next" and disable the automatic attack feature located in the bottom right corner.
Select the Wi-Fi network you identified in Waircut and click "next."
Wait a few minutes, and your computer will connect automatically.
There are numerous methods to discover the password for the connected Wi-Fi, but here is a straightforward approach that does not require additional software.
To do this:
Open the Run dialog, type "ncpa.cpl," and press Enter.
Double-click on the Wi-Fi connection.
Select "Properties," then navigate to the Security tab and check the box for "Show password."
Congratulations! You now have access to your neighbor's Wi-Fi password.
You can also perform a MITM attack to compromise your neighbor's device.
Note: This method may require multiple attempts, but with some luck, you might obtain the PIN on your first try. Best of luck.